Eco/Nitro OBD2 Fuel Saver Chip Tuning Box Plug & Drive | Benzine/Diesel
Car Plug and Drive NitroOBD2 Chip Tuning Box for Benzine Cars… 35% More Power, 25% More Torque. NitroOBD2 is a Plug & Drive Ready device to function the increasing the performance of engine.
NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996.
It works based OBD2 protocols as remapping the Car's computer ECU. After driving 200 km road total, NitroOBD2 adjusts itself to the car, according to the driver’s habits and always keeps remapping the ECU to increase the performance of engine.
The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning. Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.
Installation and Calibration:
1) Pull the Car Key out from the ignition.
2) Find OBD2 connector (*) in your car and Plug in EcoOBD2.
3) Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4) Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
5) Start up the engine. 6) EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus.
Color: Optional (Green, Yellow, Red or Blue)
Suitable Models: Benzine/Diesel cars
Operating temperature: 0~50℃
Size: 48mm x 31mm x 25mm
1 x Eco OBD2 | Optional Model